Potrzebny schemat rozrządu E36 318 TDS 95r

[neo61]

witam

Jak w temacie.Potrzebuje dla znajomego schemat rozrządu i info co i jak ,żeby działało:)

 

Dzięki za pomoc.

 

Pozdr

[nokerman]

http://img86.imageshack.us/img86/3521/e36318tdsvalvetrim6ri.th.jpg

 

Special tools

• Flywheel timing pin - BMW No.11 2 300.
  
• Timing chain tensioner locking pins - BMW No.11 3 340.
  
• Camshaft alignment tool - BMW No.11 3 320.
  
• Timing chain compressor tool - BMW No.11 3 360.
  
• Injection pump sprocket puller - BMW No.13 5 120.

General precautions

• Disconnect battery earth lead.
  
• Remove glow plugs to ease turning engine.
  
• Turn engine in normal direction of rotation (unless otherwise stated).
  
• Observe tightening torques.
  
• If fitted: Mark position of crankshaft position (CKP) sensor before removal.
  
• Do NOT turn crankshaft via camshaft or other sprockets.
  
• Do NOT turn crankshaft or camshaft with timing chain removed.
  
• Check diesel injection pump timing after resetting valve timing.

Valve timing procedures

• Engine at TDC on No.1 cylinder [1]11666.
  
• Insert flywheel timing pin [1]11666. Tool No.11 2 300.
  
• 4 cylinders: Align injection pump sprocket timing mark 4 with timing chain bright link [2]11666.
  
• 6 cylinders: Align injection pump sprocket timing mark 6 with timing chain bright link [2]11666.
  
• Align crankshaft sprocket timing mark with bright link [3]11666.
  
• Install camshaft alignment tool [4]11666. Tool No.11 3 320.
  
• Compress timing chain [5]11666. Use tool No.11 3 360.
  
• Insert locking pins in tensioner [6]11666. Tool No.11 3 340.
  
• Remove injection pump sprocket [7]11666. Use tool No.13 5 120.
  
• Tighten injection pump sprocket nut to 50 Nm [8]11666.
  
• Tighten crankshaft damper bolts to 22 Nm [9]11666.
  
• [A]11666: 80 links. 11666: 74 links.

 

PZDR